Box for synchronization of four hall effect actuators
Box for synchronization of four hall effect actuators
Box for synchronization of four hall effect actuators
Box for synchronization of four hall effect...
Box for synchronization of four hall effect...
Box for synchronization of four hall effect...

Box for synchronization of four hall effect actuators

Expédition sous 15 jours
€399.00
Tax excluded

This control box allows 100% synchronized control  of four Hall effect electric actuators. The control box comes with all hardware required for wireless operation. Two FCC-approved wireless remote controls with momentary and non-momentary motion control capabilities.
Please note that this control box is only compatible with actuators with Hall effect sensors.

Which are usually available to order. MPP-MDM, MPP-IQ

Volts

 
Order type 100% synchronization under any situation. Included in the Kit

The control box

Two remote controls.

A 30 A fuse.
Input voltage 12/24 Volt Remote control operation:

Momentary

Non-Momentary.
Output voltage 12/24V Volt Battery models in the remote: 2x CR2016 3V Lithium
Max current:  30 A (15 A by electric linear actuator) Cut:
MPP-CS4-4
New
3760280460075
No reviews

Customers who bought this product also bought:

RSP-320-24 320W Integrated Switching Power Supply
En stock
Alimentations électriques

RSP-320-24 320W Integrated Switching Power Supply

RSP-320-24
€61.00
Mean Well Switch Mode Power Supply The Mean Well RSP-320 Integrated AC/DC Switching Power Supply single output 321.6 W is rated at 13.4 A output at 24 VDC. It has a universal input supply voltage of 88 to 264 VAC and 124 to 370 VDC Power supply is 40% smaller than corresponding models. The ambient temperature ranges from 30°C and 50°C under full load...
Alimentation Vérins Alimentation Vérins 2
Expédition en 24h
Control systems

All in one 220V/12V or 24v power supply kit for Actuators

MPP-AL1
€74.92
This all-in-one control kit will allow you to connect your 12V electric actuator directly to a standard 220 V AC electrical outlet. Current: 2A (max 7A) Short circuit protection. Compatible only with the following 12 volt actuators: MPP-EC-12v MPP-ECH-12V MPP-MD-12V
View
Linear actuator MPP-TW52 600 kg IP67 Linear actuator MPP-TW52 600 kg IP67 2
Last items in stock
Linear Actuators

Linear actuator MPP-TW52 600 kg IP67

MPP-TW52
€399.00
IP67 index which allows it temporary immersion under water. Three forces available 1200, 3000 and 6000 Newton at respective speeds of 25 mm/s, 10 mm/s and 5 mm/s.  It is ideal for outdoor applications, for automation in marine environments or agricultural machinery. They can be synchronized thanks to the Hall-sensor option and by using the appropriate...
View
50 100 mm 200 mm 300 mm 400 mm 500 mm
Mounting bracket MPP-SF5-B Mounting bracket MPP-SF5-B 2
En stock
mounting brackets

Mounting bracket MPP-SF5-B

MPP-SF5-B
€6.90
Fixing support for linear electric cylinder. Very practical for opening a hatch for example. It supports a force of 300 kg for the MPP-MD model. Two pieces are recommended at each end of your linear actuator. COMPATIBLE with the MPP-MD actuator.
Linear actuator MPP-MD 300 Kg Linear actuator MPP-MD 300 Kg 2
Last items in stock
Linear Actuators

Linear actuator MPP-MD 300 Kg

MPP-MD
€169.92
This industrial quality electric cylinder / linear actuator is perfect for all your applications requiring industrial reliability. It will be able to move a load of 300 kg at a speed of about 10 mm/s. It is ideal for replacing traditional hydraulic or air pressure in many aspects such as seat lifting, in boats, in all industrial elements in furniture, in...
View
50 100 mm 150 mm 200 mm 250 mm 300 mm 350 mm 400 mm 500 mm 600 mm 700 mm 800 mm 1000 mm
Fixing bracket for linear guide Fixing bracket for linear guide 2
En stock
mounting brackets

Fixing bracket for linear guide

MPP-SF7
€9.90
Fixing support for linear electric actuator including the MPP-ECS. This attachment does not allow rotation and is necessary for linear guidance. It supports a force of 250 kg for the light version compatible model MPP-ECS
Mounting braket for linear actuator MPP-SF5 Mounting braket for linear actuator MPP-SF5 2
Rupture de stock production de 15 jours nécessaire
mounting brackets

Mounting braket for linear actuator MPP-SF5

MPP-SF5-A
€6.90
Mounting braket for linear actuator. Very practical for opening a hatch for example. It supports a force of 250 kg for the light version compatible model MPP-EC or MPP-ECH MPP-CCS Two pieces are recommended at each end of your linear actuator.
Synchronized Dual Hall Effect linear Actuator Synchronized Dual Hall Effect linear Actuator 2
Product available with different options
Linear Actuators

Synchronized Dual Hall Effect linear Actuator

MPP-MDM
€299.00
Specification: Working voltage: 12V DC/24V DC Mini mounting length: stroke + 112mm (no sensor hall output) Loading range: 1000N - 2500N Stroke length (mm): 100-400mm Color: silver Waterproof:  IP66 Hall effect for option Ambient temperature -25 - 65°C Duty cycle: 20%, max 4min. continuous use Limited switch built-in Quiet and powerful design
View
250 mm 300 mm 350 mm 500 mm 700 mm
Product added to wishlist
Product added to compare.

Ce site utilise les cookies.